Buy for discount up to 80% Autodesk Vehicle Tracking 2018


Autodesk Vehicle Tracking 2018

Final Surface to new Corridor Top Surface Roundabouts now automatically set their “Final Surface” and project signs, road markings, etc. Roundabout Splitter Island parameters For Roundabout Splitter Islands, you can define the radii of all curb corners on the foot path crossing the island.

Entry and exit sides of the approach The entry and exit curb offsets can now be changed independently of the ICD and transition between the values can be controlled. Prospector folder and Roundabout Alignments Roundabout Alignments are now placed in their own prospector folder. Deviation offset in Arm Approach Arm alignment deviation offset can now be maintained in the Roundabout Standard and Properties dialog boxes.

Feature Notes This variable has been removed from the Junctions Property dialog box. Leader Lines were shown in the drawing by default regardless of this setting. Ignore in Capacity Calculations for Entry results in unexpected line Fixed an issue where a cord line was drawn across the entry off the ICD Circle displays with roundabouts with entries excluded from analysis.

Move Arrows using Block Fixed an issue so that roundabout turn arrows can be moved as blocks. Improved updating of alignments and profiles Updates of Civil 3D profiles and alignments have been reduced when carrying out operations on roundabouts that do not change their geometry.

Flashing Cursor Fixed an issue where the tooltip flashed when moving the cursor below the strings in view mode. Crosswalk boxing rectangle wrong size in Roundabout Standard Dialog box Fixed an issue where the Roundabout Crosswalk dialog box crosswalk panel was too small.

Closing the Roundabout Properties dialog box Fixed an issue that occurred when closing the Roundabout Properties dialog box when the Select New Standard dialog box was open.

Roundabout splitter islands with crosswalks now check for minimum curb widths and invalidate if there is not enough space for back to back curbs to be constructed. Roundabout standard file format Updated the roundabout standard file format to support data needed for defining valid lane traffic movements.

Baselines and roundabout corridors Improved the identification baselines within roundabout corridors. Final Surface to new Corridor Top Surface Roundabouts now automatically set their “Final Surface” and project signs, road markings, etc. Roundabout Splitter Island parameters For Roundabout Splitter Islands, you can define the radii of all curb corners on the foot path crossing the island.

Entry and exit sides of the approach The entry and exit curb offsets can now be changed independently of the ICD and transition between the values can be controlled. Prospector folder and Roundabout Alignments Roundabout Alignments are now placed in their own prospector folder.

Deviation offset in Arm Approach Arm alignment deviation offset can now be maintained in the Roundabout Standard and Properties dialog boxes. Feature Notes This variable has been removed from the Junctions Property dialog box. Leader Lines were shown in the drawing by default regardless of this setting. Ignore in Capacity Calculations for Entry results in unexpected line Fixed an issue where a cord line was drawn across the entry off the ICD Circle displays with roundabouts with entries excluded from analysis.

Move Arrows using Block Fixed an issue so that roundabout turn arrows can be moved as blocks. Improved updating of alignments and profiles Updates of Civil 3D profiles and alignments have been reduced when carrying out operations on roundabouts that do not change their geometry. Fly-by Camera Mode Warning Fixed an issue where a warning message box regarding Fly-by Camera mode not being available when using driver eye view had an invalid window title. Overlapping Buttons Fixed an issue of two overlapping buttons on the Report Wizards Graph details page.

Overlapping Icons Fixed an issue where there were overlapping icons on the buttons at the bottom of the Auto Drive dialog box. Parking Bay Dimensions Fixed an issue when editing the parking bay dimensions table where it was not refreshing with the defaulted or calculated value when the cell was set to zero or cleared. Parking Messages For Parking, repeated messages informing you that the row cannot be constructed when creating parallel rows with curved bays were removed.

Parking Row Message Fixed an issue where some parking rows caused the following message to display repeatedly and apparently randomly appear in the command line: Roundabouts Approach Exit Side Fixed an issue where the Add Roundabout Approach dialog box was copying the min and max exit side values from the entry side.

Approach Road Fixed an issue where the roundabout approach road sometimes was invalid when adding a new road alignment. Arm Blend Point Fixed an issue where the blend point on an arm could sometimes be moved a long way from the roundabout when adding the arm. Canceling Fixed an issue to remove the dialog box asking to confirm deletion of owned sub-entities when canceling the creation of a new roundabout.

Corridors Fixed issues with uneven Roundabout corridors caused by two different alignments used to define joining baselines. Design Check Fixed an issue where the Design Check for roundabout slip lane text was truncated and missing the key values.

Double Lane Slip Lane Fixed an issue when adding a double lane slip lane to a roundabout. Flare Length Ratio Design Checks Fixed an issue where the roundabout flare length ratio design checks where using the wrong conversion factor when displaying invalid values. Invalid Arm Check Fixed an issue where running a design check on roundabouts with invalid arms sometimes resulted in two “Invalid Arm” errors reported.

Lane Markings Fixed an issue where the roundabout lane markings were incorrect when an additional lane was defined for the entry.

Autodesk Vehicle Tracking 2018

Autodesk Vehicle Tracking 2018

Autodesk® Vehicle Tracking Introduction and Tutorial